求助人工翻译这个机械类材料，专有名词多，谢谢！

Aircraft by the feeding hopper, sub-feed device, the spindle system, crushing chamber and the drive motor and other components. Materials from the top into the crusher, the vertical fall into a triage unit in the shunt, the goalkeeper from the control of feed material into the rotor and the staircase to the material flow. Rotor control gate to limit access to material flow, and force any excess flow of material along the staircase I "waterfall down" by the shunt into a broken umbrella into the cavity. Rotor feed into the cylinder by the introduction of high-speed rotary control (n = 1400 ~ 3600r/min, v = 40 ~ 100m / s) of the key components - rotors, the rotor speed up after the out into the (1) Stone Ishiuchi : It is formed from the lining material of the crushing chamber; (2) Hot Stone: A steel liner installed in the crushing cavity. Material from the rotor on the three consecutive spray out the mouth, like bullets and the other part of the same approach to triage and under the umbrella, and in the wheel of the surrounding ring material impact arising from the first time broken, and flying to the back ring of common on-board generated broken for the second time on many occasions, such as strikes, to form a strong "follow stone." High-speed, high-energy collisions carom high strength, impact, vibration cracking, friction and abrasive, such as the role of materials in the process block by the change and the small and broken ground. Broken the whole process of lining material in the machine and the rotor outside wall of the jet is expected to form close since since when lining (Ishiuchi stone), no wear and tear on machinery components can be broken any hard material. So as to avoid the traditional impact crusher wearing parts, and broken hardware and extremely hard materials is particularly serious defects and wear. When the installation of steel liner plate broken when the cavity (Hot Stone), as a result of steel-lined plate to absorb the energy of the material than the rock from the lining of the energy absorption is much less, so more efficient fragmentation.
There are three material spraying rotor parabolic hole orifice can be replaced with wear-resistant metal liner (that is expected to throw the first), very convenient disassembly (Figure 2). It is light weight, does not require concrete foundation can be machine can work on the trailer, less civil works, and adapt to mobile work.

我倒是想给你翻译，但是很费时间，我没有那么多的时间呀，你这急不急着用？要是不急用，我晚上给你翻译！怎么样？