I have an urgent problem that requires immediate fix.
My CPU host frequency was originally set to 1.75Ghz. After I replaced the motherbooard, I had to alter the host frequency to 1.1Ghz with an external frequency of 133Mhz to maintain the normal operation of my machine. If I used the default host frequency 1.75Ghz, the machine crashed right away. I do not know how to fix this problem because my CPU is compatible with the motherboard and video card. Further, there is nothing wrong with the CPU temperature. I tried to solve the problem by replacing the battery twice, but the same problem persisted. When I looked up the BIOS configuraiton, I saw a warning message. The message is preceded by a red alarmining signal indicated by exclamation marks. The content of the message is as follows.
!!!warning !!! manually setting theCPU host frequency is for over clock only . you must set the FBS jumper on mother board with corresponding FSB to yourCPU first,then you con manually adjust the CPU host frequency
应该是要用一个跳线来支持你的那个CPU频率,你翻下主板手册,应该有介绍,找找看那些跳线的说明。
手动设置主机的CPU频率超过最大限制。您必须设定跳线与主板有相应的安全关联,以你的CPU为第一,那么你控制手动调整CPU的频率就行了
警告!手动设置CPU主频率超过最大限制。您必须设定主板上的相应的FSB(Front Side BUS前段总线)至你的最高主频处,,然后你才能调整CPU的频率。
自己查吧
不过我觉得你知道也没用0-0?
看一下主板的说明书,找到有关cpu外频的跳线,改到相应的位置上,就可以了