征集屏幕最快的传输方式 最好是Delphi或C++的源代码 比黑洞2007 (v1.x)或Radmin快

Delphi中利用流实现网络传输屏幕图像。程序分为两部分，一个服务端，一个是客户端。程序编译后可以直接在单机、局部网或者互联网上使用。
程序原理：运行服务端开始侦听，再运行客户端，输入服务端IP地址建立连接，然后发一个字符通知服务端抓屏幕。服务端调用自定义函数Cjt_GetScreen抓取屏幕存为BMP，把BMP转换成JPG，把JPG写入内存流中，然后把流发送给客户端。客户端接收到流后做相反操作，将流转换为JPG再转换为BMP然后显示出来
新建一个工程，在Internet面版上拖一个ServerSocket控件到窗口，该控件主要用于监听客户端，用来与客户端建立连接和通讯。设置好监听端口后调用方法Open或者Active:=True即开始工作。 当客户端有数据传入，将触发ServerSocket1ClientRead事件，我们可以在这里对接收的数据进行处理。在本程序中，主要是接收客户端发送过来的字符信息并根据事先的约定来进行相应操作。
程序全部代码如下：
unit Unit1;{服务端程序}
interface
uses
Windows, Messages, SysUtils, Classes, Graphics, Controls, Forms, Dialogs, JPEG,ExtCtrls, ScktComp;
type
TForm1 = class(TForm)
ServerSocket1: TServerSocket;
procedure ServerSocket1ClientRead(Sender: TObject;Socket: TCustomWinSocket);
procedure FormCreate(Sender: TObject);
procedure FormClose(Sender: TObject; var Action: TCloseAction);
private
procedure Cjt_GetScreen(var Mybmp: TBitmap; DrawCur: Boolean);
{自定义抓屏函数,DrawCur表示抓鼠标图像与否}
{ Private declarations }
public
{ Public declarations }
end;
var
Form1: TForm1;
MyStream: TMemorystream;{内存流对象}
implementation
{$R *.DFM}
procedure TForm1.Cjt_GetScreen(var Mybmp: TBitmap; DrawCur: Boolean);
var
Cursorx, Cursory: integer;
dc: hdc;
Mycan: Tcanvas;
R: TRect;
DrawPos: TPoint;
MyCursor: TIcon;
hld: hwnd;
Threadld: dword;
mp: tpoint;
pIconInfo: TIconInfo;
begin
Mybmp := Tbitmap.Create; {建立BMPMAP }
Mycan := TCanvas.Create; {屏幕截取}
dc := GetWindowDC(0);
try
Mycan.Handle := dc;
R := Rect(0, 0, screen.Width, screen.Height);
Mybmp.Width := R.Right;
Mybmp.Height := R.Bottom;
Mybmp.Canvas.CopyRect(R, Mycan, R);
finally
releaseDC(0, DC);
end;
Mycan.Handle := 0;
Mycan.Free;
if DrawCur then {画上鼠标图象}
begin
GetCursorPos(DrawPos);
MyCursor := TIcon.Create;
getcursorpos(mp);
hld := WindowFromPoint(mp);
Threadld := GetWindowThreadProcessId(hld, nil);
AttachThreadInput(GetCurrentThreadId, Threadld, True);
MyCursor.Handle := Getcursor();
AttachThreadInput(GetCurrentThreadId, threadld, False);
GetIconInfo(Mycursor.Handle, pIconInfo);
cursorx := DrawPos.x - round(pIconInfo.xHotspot);
cursory := DrawPos.y - round(pIconInfo.yHotspot);
Mybmp.Canvas.Draw(cursorx, cursory, MyCursor); {画上鼠标}
DeleteObject(pIconInfo.hbmColor);{GetIconInfo 使用时创建了两个bitmap对象. 需要手工释放这两个对象}
DeleteObject(pIconInfo.hbmMask);{否则,调用他后,他会创建一个bitmap,多次调用会产生多个,直至资源耗尽}
Mycursor.ReleaseHandle; {释放数组内存}
MyCursor.Free; {释放鼠标指针}
end;
end;
procedure TForm1.FormCreate(Sender: TObject);
begin
ServerSocket1.Port := 3000; {端口}
ServerSocket1.Open; {Socket开始侦听}
end;
procedure TForm1.FormClose(Sender: TObject; var Action: TCloseAction);
begin
if ServerSocket1.Active then ServerSocket1.Close; {关闭Socket}
end;
procedure TForm1.ServerSocket1ClientRead(Sender: TObject;
Socket: TCustomWinSocket);
var
S, S1: string;
MyBmp: TBitmap;
Myjpg: TJpegimage;
begin
S := Socket.ReceiveText;
if S = 'cap' then {客户端发出抓屏幕指令}
begin
try
MyStream := TMemorystream.Create;{建立内存流}
MyBmp := TBitmap.Create;
Myjpg := TJpegimage.Create;
Cjt_GetScreen(MyBmp, True); {True表示抓鼠标图像}
Myjpg.Assign(MyBmp); {将BMP图象转成JPG格式,便于在互联网上传输}
Myjpg.CompressionQuality := 10; {JPG文件压缩百分比设置,数字越大图像越清晰,但数据也越大}
Myjpg.SaveToStream(MyStream); {将JPG图象写入流中}
Myjpg.free;
MyStream.Position := 0;{注意:必须添加此句}
s1 := inttostr(MyStream.size);{流的大小}
Socket.sendtext(s1); {发送流大小}
finally
MyBmp.free;
end;
end;
if s = 'ready' then {客户端已准备好接收图象}
begin
MyStream.Position := 0;
Socket.SendStream(MyStream); {将流发送出去}
end;
end;
end.

上面是服务端，下面我们来写客户端程序。新建一个工程，添加Socket控件ClientSocket、图像显示控件Image、一个 Panel 、一个Edit、两个 Button和一个状态栏控件StatusBar1。注意：把Edit1和两个 Button放在Panel1上面。ClientSocket的属性跟ServerSocket差不多，不过多了一个Address属性，表示要连接的服务端IP地址。填上IP地址后点“连接”将与服务端程序建立连接，如果成功就可以进行通讯了。点击“抓屏”将发送字符给服务端。因为程序用到了JPEG图像单元，所以要在Uses中添加Jpeg.
全部代码如下：
unit Unit2{客户端};
interface
uses
Windows,Messages,SysUtils,Classes,Graphics,Controls,Forms,Dialogs,StdCtrls,ScktComp,ExtCtrls,Jpeg, ComCtrls;
type
TForm1 = class(TForm)
ClientSocket1: TClientSocket;
Image1: TImage;
StatusBar1: TStatusBar;
Panel1: TPanel;
Edit1: TEdit;
Button1: TButton;
Button2: TButton;
procedure Button1Click(Sender: TObject);
procedure ClientSocket1Connect(Sender: TObject;
Socket: TCustomWinSocket);
procedure Button2Click(Sender: TObject);
procedure ClientSocket1Error(Sender: TObject; Socket: TCustomWinSocket;
ErrorEvent: TErrorEvent; var ErrorCode: Integer);
procedure ClientSocket1Read(Sender: TObject; Socket: TCustomWinSocket);
procedure FormCreate(Sender: TObject);
procedure FormClose(Sender: TObject; var Action: TCloseAction);
procedure ClientSocket1Disconnect(Sender: TObject;
Socket: TCustomWinSocket);
private
{ Private declarations }
public
{ Public declarations }
end;
var
Form1: TForm1;
MySize: Longint;
MyStream: TMemorystream;{内存流对象}
implementation
{$R *.DFM}
procedure TForm1.FormCreate(Sender: TObject);
begin
{-------- 下面为设置窗口控件的外观属性 ------------- }
{注意:把Button1、Button2和Edit1放在Panel1上面}
Edit1.Text := '127.0.0.1';
Button1.Caption := '连接主机';
Button2.Caption := '抓屏幕';
Button2.Enabled := false;
Panel1.Align := alTop;
Image1.Align := alClient;
Image1.Stretch := True;
StatusBar1.Align:=alBottom;
StatusBar1.SimplePanel := True;
{----------------------------------------------- }
MyStream := TMemorystream.Create; {建立内存流对象}
MySize := 0; {初始化}
end;
procedure TForm1.Button1Click(Sender: TObject);
begin
if not ClientSocket1.Active then
begin
ClientSocket1.Address := Edit1.Text; {远程IP地址}
ClientSocket1.Port := 3000; {Socket端口}
ClientSocket1.Open; {建立连接}
end;
end;
procedure TForm1.Button2Click(Sender: TObject);
begin
Clientsocket1.Socket.SendText('cap'); {发送指令通知服务端抓取屏幕图象}
Button2.Enabled := False;
end;
procedure TForm1.ClientSocket1Connect(Sender: TObject;
Socket: TCustomWinSocket);
begin
StatusBar1.SimpleText := '与主机' + ClientSocket1.Address + '成功建立连接!';
Button2.Enabled := True;
end;
procedure TForm1.ClientSocket1Error(Sender: TObject;
Socket: TCustomWinSocket; ErrorEvent: TErrorEvent;
var ErrorCode: Integer);
begin
Errorcode := 0; {不弹出出错窗口}
StatusBar1.SimpleText := '无法与主机' + ClientSocket1.Address + '建立连接!';
end;
procedure TForm1.ClientSocket1Disconnect(Sender: TObject;
Socket: TCustomWinSocket);
begin
StatusBar1.SimpleText := '与主机' + ClientSocket1.Address + '断开连接!';
Button2.Enabled := False;
end;
procedure TForm1.ClientSocket1Read(Sender: TObject;
Socket: TCustomWinSocket);
var
MyBuffer: array[0..10000] of byte; {设置接收缓冲区}
MyReceviceLength: integer;
S: string;
MyBmp: TBitmap;
MyJpg: TJpegimage;
begin
StatusBar1.SimpleText := '正在接收数据......';
if MySize = 0 then {MySize为服务端发送的字节数，如果为0表示为尚未开始图象接收}
begin
S := Socket.ReceiveText;
MySize := Strtoint(S); {设置需接收的字节数}
Clientsocket1.Socket.SendText('ready'); {发指令通知服务端开始发送图象}
end
else
begin {以下为图象数据接收部分}
MyReceviceLength := socket.ReceiveLength; {读出包长度}
StatusBar1.SimpleText := '正在接收数据,数据大小为:' + inttostr(MySize);
Socket.ReceiveBuf(MyBuffer, MyReceviceLength); {接收数据包并读入缓冲区内}
MyStream.Write(MyBuffer, MyReceviceLength); {将数据写入流中}
if MyStream.Size >= MySize then {如果流长度大于需接收的字节数，则接收完毕}
begin
MyStream.Position := 0;
MyBmp := tbitmap.Create;
MyJpg := tjpegimage.Create;
try
MyJpg.LoadFromStream(MyStream); {将流中的数据读至JPG图像对象中}
MyBmp.Assign(MyJpg); {将JPG转为BMP}
StatusBar1.SimpleText := '正在显示图像';
Image1.Picture.Bitmap.Assign(MyBmp); {分配给image1元件 }
finally {以下为清除工作 }
MyBmp.free;
MyJpg.free;
Button2.Enabled := true;
{ Socket.SendText('cap');添加此句即可连续抓屏 }
MyStream.Clear;
MySize := 0;
end;
end;
end;
end;
procedure TForm1.FormClose(Sender: TObject; var Action: TCloseAction);
begin
MyStream.Free; {释放内存流对象}
if ClientSocket1.Active then ClientSocket1.Close; {关闭Socket连接}
end;
end.