gun grub里怎么设置系统的顺序？Ubuntu Linux高手进来看看

把/etc/default/grub里的GRUB_DEFAULT =0改为GRUB_DEFAULT="Windows Vista"
具体内容看下面

grub (/etc/default/grub)

This file contains information previously found in the upper section of /boot/grub/menu.lst. It contains settings primarily affecting Grub's menu display. This file can be edited by root to make changes to these settings; they will be imported into grub.cfg when "update-grub" is executed.

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.

GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entrys
#GRUB_DISABLE_LINUX_RECOVERY="true"

This file contains information formerly contained in the upper section of Grub Legacy's ''menu.lst'' and items contained on the end of the kernel line. The items in this file can be edited by a user with administrator (root) privileges. Grub developers have have placed explanatory comments within the file itself.

*

GRUB_DEFAULT=0
o

Sets the default and pre-selected menu entry. Entries may be numeric or saved
o

GRUB_DEFAULT=0
+ Sets the default menu entry by menu position. As with Grub Legacy, the first "menuentry" in grub.cfg is 0, the second is 1, etc.
o

GRUB_DEFAULT="Windows XP Professional (on /dev/sda1)"
+ Sets the default menu entry by name.
o

GRUB_DEFAULT=saved
+ Sets the default menu entry with either whatever was selected on the last boot (if SAVEDEFAULT=true is set and the entry itself contains savedefault), whatever the last grub-set-default command saved or the first entry if nothing has ever been saved or the saved entry can't be found. If the menu is displayed during boot, the previously selected option will be highlighted. If no action is taken, this is selection which will be booted at the end of the timeout, or if the menu is hidden.
*

GRUB_TIMEOUT=10
o No change from Grub Legacy. This is the number of seconds before the default entry is automatically booted.
o

Setting a value of -1 will display the menu until the user makes a selection (no timeout).
*

GRUB_HIDDEN_TIMEOUT=0
o

The hidden timeout option is available to single-OS computers - if multiple OS's are known to Grub 2, this option is bypassed.
o

On single-OS systems, the menu will be hidden unless a # symbol is present at the beginning of this line. ( # GRUB_HIDDEN_TIMEOUT=0 )
o The default setting initially depends on the presence of other operating systems.
+ Another OS Detected: The menu will be displayed. ( The line will begin with a # symbol. )
+ No other OS Detected: This setting is not used, as determined by the
o For integers greater than 0, the system will pause, but not display the menu, for the entered number of seconds.
o

0 The menu will not be displayed. There will be no delay.
+ The user may force displaying the menu as the computer boots by holding down the SHIFT key (single-OS computers only).
# During boot, the system will check the SHIFT key status. If it cannot determine the key status, a short delay will enable the user to display the menu by pressing the ESC key.
# If enabled, the splash screen designated in 05_debian_theme will be displayed even if the hidden menu feature is selected.
*

GRUB_HIDDEN_TIMEOUT_QUIET=true
o true - No countdown is displayed. The screen will be blank.
o false - A counter will display on a blank screen for the duration of the GRUB_HIDDEN_TIMEOUT value.
*

GRUB_DISTRIBUTOR=lsb_release -i -s 2> /dev/null || echo Debian
o Determines the descriptive name in the menu entry. (Ubuntu, Xubuntu, Debian, etc.)
*

GRUB_CMDLINE_LINUX
o

If it exists, this line imports any entries to the end of the linux command line (Grub Legacy's "kernel" line) for both normal and recovery modes. This is similar to the "altoptions" line in menu.lst
*

GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
o

This line imports any entries to the end of the 'linux' line (Grub Legacy's "kernel" line). The entries are appended to the end of the normal mode only. This is similar to the "defoptions" line in menu.lst. If you want a black screen with scrolling boot messages, remove "quiet splash". If you want a grub splash screen with limited messages underneath the Ubuntu logo, use only "splash". < This [only "splash"]will not work in Karmic during boot as the xsplash does not display the messages , but the messages at shutdown will be displayed.
*

#GRUB_TERMINAL=console
o Uncomment to disable graphical terminal (grub-pc only).
*

#GRUB_GFXMODE=640x480
o Uncomment (remove '#' from beginning of the line) to change (increase) resolution of your boot loader. Use one of classic (4:3 rate):
+ GRUB_GFXMODE=640x480 (is used if isn't here a proper value)
+ GRUB_GFXMODE=800x600
+ GRUB_GFXMODE=1024x768
+ GRUB_GFXMODE=1600×1200
o

or make experiments with some others nonstandards like widescreen (16:10 ratio in my case), here is list of most of commonly use Display resolution:
+ GRUB_GFXMODE=640x400
+ GRUB_GFXMODE=800x500
+ GRUB_GFXMODE=1024x640
+ GRUB_GFXMODE=1280x800
+ GRUB_GFXMODE=1680x1050
o If you don't know what modes are supported by your graphics card, go to the grub command line and run 'vbeinfo'. It will list all available modes. (You might need to run 'insmod vbe' first if the vbe module isn't loaded yet)
*

GRUB_GFXPAYLOAD_LINUX=640x480x8 [grub2 >= 1.98-1 (Lucid)]
o Use this setting to set the framebuffer resolution (replaces the vga= kernel option). It uses the GFXMODE values with additional color depth. Use 'vbeinfo' from the grub command line to list what modes are available to you.
*

#GRUB_DISABLE_LINUX_UUID=true
o Uncomment this line if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux.
*

GRUB_DISABLE_LINUX_RECOVERY=true
o Add or uncomment this line to prevent "Recovery" mode kernel options from appearing in the menu.
*

GRUB_DISABLE_OS_PROBER=true
o Enables/disables the os-prober check of other partitions for operating systems, including Windows, Linux, OSX and Hurd.

grub1的修改
vi /boot/grub/grub.conf
把title Windows Vista那段移到title Ubuntu的上面
然后执行grub-install /dev/sda
grub2的修改
vi /boot/grub/grub.cfg
把menuentry "windows"那段移到menuentry "Ubuntu"的上面
然后执行grub-setup /dev/sda

在ubuntu的新立得软件包管理器中安装startup manager，是图形界面的，你进去设置一下就行了

sudo gedit /boot/grub/grub.conf

把vista那段放到ubuntu前面来。

那个叫gnu不是gun