中文翻英语成英文

2025-03-05 22:01:09

推荐回答（1个）

回答1：

ZXSJ-50A manual time clock display

First, briefly
ZXSJ-50A time clock display (hereinafter referred to as display screen) displayed after power countdown start time value, but also for being a time or clock. By remote control. Timing began to sound a "beep" prompt tone, timing end of the 10 sound, "beep, beep" prompt tone. After the blackout began, the clock continues to travel time, is the end of time or countdown timer start time is not lost.
Second, the use of instructions
1, remote control button Note :0-9 numeric keys, the red button for the reset button, "SET" to set the key, "" to end the key, "CLEAR" to clear key, "▲" key to a positive start time, "▼ "as the countdown began to bond," ∧ "as a pause button," ∨ "To continue button," TIME "for the clock button," MODE "button for time display," 1 * "12-hour clock for the clock button," 2 * " 24-hour clock for the clock button.
2, indicator. Display the upper left corner above an indicator for the morning light, the following afternoon, an indicator for the indicator, the display above the bottom right corner is an indicator for the timing light, the following as the countdown to an indicator light to show the middle two-screen indicator for the second point of light.
3, is timing. First of all is time to set the end of time, pressure is set to display the window at the blinking, enter the 0-99 time when 59 points are the end of time (eg 1 hour and 30 minutes enter 130, the same below), and then press start button to save settings is time value and the time from 0 to start working, if not modify the settings directly beginning pressed keys are timing, pause, press Pause time (seconds point Changliang), continued to time pressure to continue to key (s point of flashing). State is only the timing is timing indicator Chang-liang.
4, countdown. We must first set the countdown start time, the pressure is set to display the window at the blinking, enter 0-99 hours 59 minutes Countdown start time, and then press the countdown began to save the settings and start the countdown from the set value, if not modify the settings are Direct pressure countdown start button, pause, press Pause time (seconds point Changliang), continued to time pressure to continue to key (s point of flashing). Countdown to the countdown state, only the light Chang-liang.
5, display the clock. Press the clock button is displayed scores (seconds point of flashing). To modify the clock value, the pressure is set to display the window at the blinking, enter the 0-23 point of 59 points when the scores (eg 15:30 enter 1530 and second auto-cleared, set the clock by 24-hour clock input), and then Press the clock button. State of suspended time clock display. Pressure 12-hour system (1 *) key a 12-hour clock is running, the pressure 24-hour system (2 *) key to run the clock by 24-hour system. 12-hour-time there are morning, afternoon light instructions, 24-hour all the lights are not bright.
6, display timing. Pressure time display button to return time status.
7, end of the set. Set-up process (the display window flashes) does not modify the original settings direct compression end () key or reset (red) key.
Third, pay attention to matters
1, did not work when you unplug the power cord.
2, the event runs disorder (crashes), please power off and then power (system reset).
3, using a remote control when you display a positive central alignment. Remote control uses two batteries on the 7th, do not remove the battery should be.
4, the display every two seconds inside the clock day and night there is error, may be regular or irregular adjust the value of the clock display.
Fourth, after-sales service
Free one-year warranty, long-term maintenance.

最新问答

开车惠东到惠州红花湖怎样走?

什么手机无上网功能?

求助，一首英文歌！只知道一两句歌词！

最好女生回答你们是属于一见钟情还是日久生情为什么会日久生情呢她说她属于后者怎么打动她啊

我问一下，明天上班要交证件复印件，我想标注一下合适吗？别人会不会想多了

泰州公积金贷款买房最多贷多少

换精工表玻璃多少钱如何安装手表玻璃

C语言编程前边什么适合用#include<stdio.h> 在考编程的时候不知道什么时候加这个还是加这个也不算错啊

过两天想来北京旅游，请各位朋友帮忙筹划一下吧

关于实验室制取硝基苯的几个问题