请英语高手帮忙，帮我翻译一下这些文字谢谢，（不要在线翻译的）

Molding Head Setup
Depending on head size of up to four people to install, with 10-15 minutes when
First, the preparatory work
1. Ready to load more than 2 head 2 times the weight of hoisting with the software, tiled on the ground, will head slowly scroll to the hoisting belt, hung on the crane hook at both ends of the preparations for lifting. Lifting strictly prohibited within the zone from the nose through to avoid lifting the nose when the stretch deformation
2. Cleaning the nose spindle hole and the dust on the machine spindle, on a little oil to make installation smooth.
2, the installation
1 will be connected to suit the machine spindle
2 lifting the nose, so that shaft hole and spindle docking, rotating spindle, so that a key on the spindle head of the keyway with the machine in a level line
With the power of three cranes, one to operate cranes, two flat push the nose to make the connection with the spindle sleeve connected. Such as the push into the strenuous, operable crane, so that machine spindle nose parallel, non-impact head with heavy objects to prevent head deformation, affecting the nose life
4 confirmed installed after the cable car down, fastening the nose, installed complete
Unloading head 5 by the reverse operation of 虽说是抄的....但查了机子，确实是这样... 汗...

……哪些文字？

Molding Head Setup
Depending on head size of up to four people to install, with 10-15 minutes when
First, the preparatory work
1. Ready to load more than 2 head 2 times the weight of hoisting with the software, tiled on the ground, will head slowly scroll to the hoisting belt, hung on the crane hook at both ends of the preparations for lifting. Lifting strictly prohibited within the zone from the nose through to avoid lifting the nose when the stretch deformation
2. Cleaning the nose spindle hole and the dust on the machine spindle, on a little oil to make installation smooth.
2, the installation
1 will be connected to suit the machine spindle
2 lifting the nose, so that shaft hole and spindle docking, rotating spindle, so that a key on the spindle head of the keyway with the machine in a level line
With the power of three cranes, one to operate cranes, two flat push the nose to make the connection with the spindle sleeve connected. Such as the push into the strenuous, operable crane, so that machine spindle nose parallel, non-impact head with heavy objects to prevent head deformation, affecting the nose life
4 confirmed installed after the cable car down, fastening the nose, installed complete
Unloading head 5 by the reverse operation of 记得采纳

Molding Head Setup
Depending on head size of up to four people to install, with 10-15 minutes when
First, the preparatory work
1. Ready to load more than 2 head 2 times the weight of hoisting with the software, tiled on the ground, will head slowly scroll to the hoisting belt, hung on the crane hook at both ends of the preparations for lifting. Lifting strictly prohibited within the zone from the nose through to avoid lifting the nose when the stretch deformation
2. Cleaning the nose spindle hole and the dust on the machine spindle, on a little oil to make installation smooth.
2, the installation
1 will be connected to suit the machine spindle
2 lifting the nose, so that shaft hole and spindle docking, rotating spindle, so that a key on the spindle head of the keyway with the machine in a level line
With the power of three cranes, one to operate cranes, two flat push the nose to make the connection with the spindle sleeve connected. Such as the push into the strenuous, operable crane, so that machine spindle nose parallel, non-impact head with heavy objects to prevent head deformation, affecting the nose life
4 confirmed installed after the cable car down, fastening the nose, installed complete
Unloading head 5 by the reverse operation of